Industrial products.
No public pricing is displayed. Contact us for product specifications and pricing.
Search the range.
Search by product name, part number or choose a category.
Servo Stabilizer Single Phase
The Single Phase Servo Voltage Stabilizer is equipped with a fully automatic IC based Solid Stat with Glass Epoxy control card for easy online service ability.
Servo Voltage Stabilizer 3 Phase
Three phase servo voltage stabilizer are automatic line Voltage corrector using synchronous motor in close loop control.
Servo Voltage Stabilizer
Servo Stabilizers are automatic line Voltage corrector using synchronous motor in close loop control.
Step Up & Step Down Transformer
Step Down Transformers have a primary winding of higher number of turns than the secondary winding.
SINGLE PHASE APPLIANCE PROTECTION RELAY RN-116
RN-116 indicates actual input voltage value, fault condition and output relay condition.
SINGLE PHASE VOLTAGE MONITORING RELAY RN-102
RN-102 single phase voltage monitoring relay is designed to de-energize an industrial/appliance single-phase 220V/50Hz load in case of inadmissible voltage variations
SINGLE PHASE APPLIANCE PROTECTION RELAY RN-101M
RN-101M voltage monitoring relay with built-in electronic MCB (16A) is designed to de-energize an industrial/domestic appliance single phase 220 – 240V/50Hz load
THREE PHASE VOLTAGE MONITORING RELAY RNPP-301
The device performs monitoring the main circuit parameters and de-energizes load when the parameters fall beyond specified boundaries.
THREE PHASE PROGRAMMABLE VOLTAGE MONITORING RELAY RNPP-302M
The device performs monitoring the main circuit parameters and de-energizes (trips) load when the parameters fall beyond specified boundaries.
AUTOMATIC ELECTRONIC PHASE SELECTOR PEF-320
PEF-320 universal automatic electronic phase switch is designed to supply an industrial and domestic single phase 230 V, 50 Hz load from three-phase four-wire mains 3х400+N
AUTOMATIC ELECTRONIC PHASE SELECTOR PEF-301
PEF-301 universal automatic electronic phase switch is designed to supply industrial and household appliance single phase 220 – 230V/50Hz loads from three-phase four-wire mains 3×380+N
ASTRO TIMER WITH PHOTO SENSOR AND VOLTAGE MONIT. REV-302
Programmable Astronomical Timer with Photo Sensor and Voltage Protection REV-302 multifunctional relay is a microprocessor based programmable device
MULTIFUNCTIONAL ASTRONOMICAL TIMER REV-303
Multifunctional Astronomical Timer REV-303 is a microprocessor-based programmable device designed to control the loads in real time without permanent maintenance with minimum expenses
PROGRAMMABLE TIME DELAY RELAY WITH EXTERNAL INPUT AND DISPLAY REV-114
REV-114 is equipped with control buttons and a digital display designed for adjustment and visual check of timing.
MULTIFUNCTION TIME DELAY RELAY WITH EXTERNAL INPUT REV-120
Multifunction time delay relay REV-120 is a microprocessor based device intended for on/off switching the load in user defined time intervals.
SINGLE PHASE MOTOR PROTECTION DEVICE UBZ-115
Single Phase Motor Protection Unit and Starter UBZ-115 is a microprocessor unit. UBZ-115 provides protection to single-phase induction electric motors with power up to 2 kW (25А).
NUMERIC LT MOTOR PROTECTION DEVICE UBZ-304
UBZ-304 Numeric electric motor protection device is designed for protection of asynchronous LT motors having power of 2.5 to 315 kW (5A – 630A), with use of external standard current transformers.
DIGITAL PID TEMPERATURE CONTROLLER TR-101
TR-101 digital temperature controller is used to measure and control device temperature via four independent sensors connected in a two or three-wire circuit, with subsequent indication of the temperature on the display.
DRY TRANSFORMER TEMPERATURE CONTROLLER TR-100
ТR-100М is microprocessor based device intended to measure and control temperature mode of dry-type transformer with four transducers connected by two or three wire circuit.
AUTOMATIC ELECTRONIC PHASE SELECTOR PEF-320
PEF-320 universal automatic electronic phase switch is designed to supply an industrial and domestic single phase 230 V, 50 Hz
PROGRAMMABLE SEQUENTIAL AND COMBINATION TIMER TK-415
Sequential and Combination Timer with RS-232 communication
POWER CONTROLLER & CURRENT-VOLTAGE MONITORING RELAY OM-163
ОМ-163 is powered by the circuit that feeds the load. ОМ-163 displays the value of the parameters and the status of the relay using LED indicators and display.
THREE PHASE VOLTAGE & NEUTRAL MONITORING RELAY RNPP-312
The device provides the possibility of adjusting the parameters (voltage threshold, time of automatic reclosing and time delay of protection operation)
UNIVERSAL THREE PHASE MOTOR PROTECTION RELAY UBZ-301
UBZ-301 universal electric motor protection unit (further referred to as the unit) is designed for continuous monitoring of the circuit voltage parameters
THREE PHASE MOTOR PROTECTION DEVICE UBZ-302
The device detects the presence of load currents when the load relay is open (when the load relay is open and the functional relay is in the star-delta mode).
DEMAND CONTROLLER OVERCURRENT-EARTH FAULT RELAY OM-310
The device allows working with a load of 2.5 – 30 kW with the use of integrated current transformers, and with a load of up to 450 kW
INTELLIGENT HVAC-ROOM TEMPERATURE CONTROLLER MCK-301-6X
MCK-301-61 complies with requirements: IEC 60947-1; ІEC 60947-6-2; CISPR 11; IEC 61000-4-2.
AUTOMATIC ELECTRONIC PHASE SELECTOR PEF-319
PEF-319 universal automatic electronic phase switching device is designed to supply an industrial and domestic single phase 220/230/240 V, 50 Hz load from three-phase four-wire mains 3×380+N
POWER QUALITY ANALYSER AND DATA LOGGER RPM-416
Power Analyser and Data logger RPM-416 is a device intended for power quality analysis, electrical & process parameters measuring, monitoring as well as data archiving/storage with a sampling rate starting from 1 millisecond.
INTERFACE CONTROLLER FOR IOT SOLUTIONS EM-481
EM-481 provides data collection from connected MODBUS devices, data transfer to the server, data access via MODBUS TCP (GPRS, Ethernet) or SMS text messages (GSM).
INTERFACE CONTROLLER FOR IOT WITH BUILT-IN I/Os EM-486
Interface controller with built-in I/Os for Remote Operation/Monitoring EM-486 provides access to readings of communicable devices, gauges and sensors from their registers of Modbus connected via RS-485 interface
PROTOCOL CONVERTER (RS485 MODBUS TO ETHERNET) ET-485
ET-485 is a microcontroller unit. It is designed to exchange data over the Ethernet 10BASE-T and 100BASE-T network using the equipment, which is provided with the RS-485 interface
DIGITAL INPUT-OUTPUT MODULE FOR IOT SOLUTIONS OB-215
ОВ-215 allows data exchanging with external devices via the serial interface of RS (EIA/TIA)-485 via ModBus protocol with the limited set of commands (see Table 5 for a list of supported functions).
SINGLE PHASE VOLTAGE MONITORING RELAY RN-111M
RN-111M single phase voltage monitoring relay is designed to de-energize an industrial/appliance single phase 220 – 240V/50Hz load in case of inadmissible voltage variations in the mains.
SINGLE PHASE VOLTAGE MONITORING RELAY RN-113
RN-113 single phase voltage monitoring relay is designed to de-energize an industrial/appliance single-phase 220V/50Hz load in case of inadmissible voltage variations in the mains.
THREE PHASE VOLTAGE MONITORING RELAY RNPP-311M
The device performs monitoring of the main circuit parameters and de-energizes (trip) load when the parameters fall beyond specified boundaries.
TWO CHANNEL MULTIFUNCTION TIME DELAY REV-201M
REV-201M is designed for the commutation of electrical circuits of 240V 50Hz AC as well as 24V DC electrical circuits with the adjustable time delay setting.
Distribution Transformer
A Distribution Transformer is an essential electrical device designed to reduce high-voltage electricity to a lower, usable voltage suitable for residential, commercial, and industrial applications.